收缩

工作时间

周一到周六:8:00-11:30
                    13:30-17:30

联系方式

电话:0769-82262772
          0769-82262773

邮箱:siboasi@whqss.com

官方微信公众号

400-858-3336

Technology products

科技产品
羽毛球场建设方案
官方指导价:¥

羽毛球场为一长方形场地,长度为13.40米,双打场地宽为6.10米,单打场地宽为5.18米。球场上各条线宽均为4厘米,丈量时要从线的外沿算起。球场界限最好用白色、黄色或其它易于识别的颜色画出。按国际比赛规定,整个球场上空空间最低为9米,在这个高度以内,不得有任何横梁或其它障碍物,球场四周2米以内不得有任何障碍物。任何并列的两个球场之间,最少应有2米的距离。球场四周的墙壁最好为深色,不能有风。


羽毛球场一般使用的面层材料有硅PU塑胶羽毛球场、PVC塑胶地板,木地板羽毛球场等。

 

目前市场上还有一种新的地板材料DIY拼装地板(悬浮式拼装地板),相对而言价格最便宜是施工方式就是直接在水泥基础上铺设PVC塑胶地板,PVC塑胶地板是卷材,铺设方便,铺好后即可直接使用;硅PU塑胶地板相对造价要高于PVC塑胶地板; 而价格最贵的是木地板,但是目前对运动地板要求高的训练单位一般会采用在木地板上再铺设一层PVC塑胶地板,运动效果更佳,场地高档美观。

 

PVC塑胶地板

⒈ 能够用最少的初期投资费用创造出最佳的体育活动空间。

 PVC弹性地板材料是国际正式的包括篮球在内的所有球类运动场地的最佳选择。只有PVC运动地板才可能被用来铺设国际公认的羽毛球、乒乓球、排球、手球等的比赛场地。

⒊ 与硬质地面相比,具有良好的安全性、减震性和反弹力,自身的运动性也得到充分的发挥。

⒋ 耐用、美观,并有多种颜色和款式可供选择。

 

地板材料结构精密

⒈ 产品由PVC耐磨层、玻璃纤维加强层和PVC发泡缓冲层组成。

 100%PVC耐磨层,经防老化和紧固技术处理,耐磨耐压,使用寿命可达15年。

⒊ 玻璃纤维加强层起到稳定场地尺寸、延长使用寿命的作用,使地板永不收缩,性能更加稳定,使运动员发挥出更好水平。

⒋ 封闭式PVC发泡缓冲层材料如气垫式构造,提供绝对的安全性、回弹性和标准的吸振性,吸振率达到30%50%

 PVC发泡缓冲层底面采用状纹路处理,合理的重量能在场地铺开时将里面的空气排出,形成真空,更加具有附着力,在运动时更具有稳定性。

 

舒适性佳

 PVC耐磨表层的荔枝皮花纹设计,另鞋底时刻紧着地面,防滑且能随心所欲传递强劲的动力。

⒉ 场地表层经特殊处理,与灯光亮度吻合,不会吸光和反光刺眼,能更好的保护运动员的眼睛,不易产生疲劳。

⒊ 人性化的设计组合,与众不同的场地色感,防滑且回应动力极强,防擦伤纹理,全新技术开发的PVC发泡缓冲层为健康运动带来可靠保障,为专业运动员、普通健身民众提供极好的运动缓冲保护,可最大限度地减小运动员的损伤,令您放心地驰骋在运动赛场上屡夺佳绩。

 

移动性佳

地板表面的类人体工程学不规则圆形纹理弧边设计,使滑动系数为最佳值,使运动员有更佳的活动能力,为起动、蹬 跳、滑步、制动等各种专业剧烈技术动作提供极具爆炸力的弹性动力结构。

 

绿色环保

产品具有高新技术抗菌功能,具有无毒、无味、绿色环保、防水、防滑、防霉菌等特性.

 

二 对场地基层要求

1.施工的地面必须保持清洁,持久干燥,且没有裂缝。

2.混凝土地面含水率不得超过2.5%,石膏地面含水率不得超过0.5%。

3.地板表面2m直尺范围内误差不大于3mm

此外,木地板、复合木地板、瓷砖、大理石和水磨石地板平整度达到要求均可铺装。

 

三 铺装方法

在地板铺设之前,地面必须清扫干净,地板提前展开平铺在地面24小时以上,且现场温度不应低于15度。地板还原后,切割时两端应多留5厘米。

1.移动式铺装:地板与地板之间用厂家配套的专用单面连接带粘接成一体,地板与地面不粘接,以方便将来移动。

2.局部固定式铺装方法:在地面上以地板的边缘线为基准向内刷10cm的胶粘接,或用厂家配套的专用双面连接带粘接。

3.全胶粘接铺装方法:塑胶地板与地面全部用胶水粘接。(篮、 网球场地最好采用全胶粘接,否则球与地面接触时会影响球的反弹)

 

焊接-热焊法

地板焊接前先用手工或者机器在地板接缝处开槽,开槽处必须清理干净,热焊时的温度不低于500度,焊接可采用自动设备或人工操作。正式焊接前,先用一小段焊线,来测试一下焊接时适当的温度,焊缝处冷却后分两步去除多余的焊线,先用月牙铲铲掉焊线突起部分的一半,待焊线充分冷却后,铲去余下部分。



Badminton court is a rectangular field, length of 13.40 meters, 6.10 m wide field doubles, singles field 5.18 meters wide. The width of the pitch of each 4 cm, measured from the line when the outer edge of the date. The court boundaries is best to use white, yellow or other colors of paint for easy identification. According to the provisions of the international the game, the stadium over the space for a minimum of 9 meters,in this height,shall not have any beams or other obstructions.

Oraround the stadium within 2 meters without any obstacles.Between any two parallel court shall have a minimum distance of 2 meters. The stadium walls preferably dark, nowind.



Badminton courts are generally used in the surface layer of silicon PU plastic badminton courts, PVC plastic floor, wooden floor badminton courts and so on.

 

Currently on the market there is a new DIY flooring flooring (suspension flooring), relative price is the cheapest,the form of construction is directly on the cement foundation laying the PVC plastic floor, PVC plastic flooring is a coil material, convenient laying, can be used directly after paved; silicon PU plastic floor relative cost is higher than that of PVC plastic floor; and the most expensive wooden floor, but the floor movement demanding training units generally use a layer of PVC plastic floor paved on the wooden floor, the movement effect is better, the site has a high-grade appearance.

 

一、PVC plastic floor

 

1. can create the best sports space with the least early-stage investment.

2.The PVC is a formal international elastic floor materials include basketball, sports venues all the best choice. Only PVC can be used to build sports floor international badminton, table tennis, volleyball, handball and other venues.

3.compared with the hard ground, with good safety, and rebound damping, the movement itself has been fully played.

4.Durable, beautiful, and has a variety of colors and styles to choose from.


 

Floor material structure precision

 

1.The product from PVC wear-resisting layer, glass fiber reinforced foam layer and PVC buffer layer.

2.The 100% pure PVC wear-resisting layer, the anti-aging and fastening techniques, wear resistant, the service life of up to 15 years.

3.glass fiber reinforced layer to stabilize the size of the field, prolong the service life of the role, so that the floor will never shrink, the performance is more stable, so that athletes play a better level.

4.The closed PVC foam cushion layer material such as air cushion structure, provide absolute security, resilience and vibration standard, vibration absorption rate of 30% - 50%.

5.The PVC foaming buffer layer the bottom of the shape of grain processing, reasonable weight can site spread when the inside of the air, forming a vacuum, more adhesion, more stability in motion.

 

Good comfort

 

1.The pattern design of litchi peel PVC wear surface, the other shoe sole moment tight ground, non skid and can transfer a strong impetus.

 

2.The ground surface by special treatment, consistent with the brightness of the light, not absorb light and reflective glare, athletes can better protect the eyes, not easy to produce fatigue.

 

3.User-friendly design, the site out of the ordinary sense of color, non skid and dynamic response is extremely strong, anti abrasion texture, PVC foaming buffer layer new technology development for health movement to bring reliable support for professional athletes, ordinary people to provide a buffer to protect the excellent fitness exercise, can reduce the injury, make you rest assured ride in the sports arena wins success.

Better mobility

 

Type of ergonomic floor surface irregular circular arc edge texture design, so that the sliding coefficient is the best value, so players have better activity for starting, leg jumping, sliding, braking and other professional technology intense action to provide elastic dynamic structure of highly explosive force.

 

Green environmental protection

 

The product has the high - tech antibacterial function, has non-toxic, tasteless, green environmental protection, waterproof, non slip, anti - mildew and so on.

 

二、Two basic requirements for the site

 

1.construction of the ground must be clean, durable, and no cracks

2.concrete surface moisture content shall not exceed 2.5%, gypsum ground moisture content shall not exceed 0.5%.

3.The surface of the floor is 2 meters straight range error is less than 3 meters.

In addition, wood flooring, composite wood flooring, ceramic tile, marble and terrazzo floor flatness can meet the requirements of pavement.

 

三、Paving method

 

Laying on the floor before the ground must be cleaned,the ground ahead of the start tile on the ground for more than 24 hours,and the temperature should not be less than 15 degrees. The floor after reduction, cutting ends should stay 5 cm.

 

1.mobile pavement: the floor and the floor with the manufacturers supporting the use of a single side with a single adhesive tape, the floor and the ground does not adhere to facilitate future movement.

 

2.local fixed paving method: on the ground floor to the edge of the line as the benchmark to brush 10CM of glue,or the use of specialized manufacturers with double-sided adhesive tape.

 

3.glue adhesive paving method: plastic floor and the ground with all glue. (basket, tennis court is best to use glue bonding, otherwise the ball and the ground contact will affect the ball bounce)

 

Welding heat welding method

 

The floor before welding by hand or machine on the floor seam slot, slot must be clean, heat welding when the temperature is not lower than 500 degrees, welding can be automatic equipment or manual operation. The official before welding, first with a short welding line, to test the welding temperature, welding seam after cooling two steps to remove the excess wire, first with the crescent shovel,shovel out half the welding line of the protruding part, the welding line fully cooled, shovel to rest.


东莞市斯波阿斯体育用品科技有限公司

地址:广东省东莞市虎门赤岗富马工业区(新治保会对面)

版权所有:斯波阿斯体育   http://www.whqss.com   粤ICP备09140637号

斯波阿斯微信公众号

斯波阿斯官方微博